鋼珠馬蓮DIY製作PVC熱收縮

拓印
關注：1.91W次

非常經濟適用的製作

我的漢巴仁在列印約800奧本的印象後，相當於一個PVC收縮包裝封面-沒有明顯的磨損。

不時它已經很難獲得優質takenokawa（竹殼）用於恢復我的巴倫斯。 For some time I've wondered about alternativematerials for baren covers, especially about using heat shrinktubing.一段時間以來我一直想知道的巴人蓋的替代材料，特別是有關使用熱縮管。 I bought some six inch wide clear layflat PVCheat shrink tubing (12 inch circumference), cut a length about 21/2 times the diameter of my baren, trimmed the ends to makethinner handles and… It seems to have worked pretty well,actually!我買了一些6英寸寬的清晰吹塑，PVC熱縮套管（12英寸周長），切成長度為巴朗我大約21/2倍的直徑，修剪的兩端，使更薄的把手和...它似乎工作得很好，居然！ Covering a baren with takenokawa the traditionalway requires a lot of practice and somedexterity.涵蓋了巴人與takenokawa的傳統方式需要大量的練習和一些靈巧。Coveringa baren with PVC heat shrink tubing seems to require very littleskill or dexterity — as long as you don't over heat the material(or the baren!) it seems prettyfool-proof.覆蓋與PVC熱縮套管巴倫一人似乎都需要很少的技能或靈巧 -（！或巴人），只要你不要過度加熱材料似乎很傻瓜的證明。

Theparticular PVC heat shrink tubing I acquired seems a bit too thinor light weight (5 mil) for abaren.我獲得了特定的PVC熱縮套管的巴人似乎有點太細或重量輕（5密耳）。 Even so, less flexible than takenokawa but seemshardier.即便如此，也比takenokawa不太靈活，但似乎強壯。 Hardiness is good because the shrink-wrappedbaren is completely encased front and back so it's impossible torotate the baren during printing so all wear occurs where the highpoints of the coil press the shrink wrap against the paper andblock.抗寒性還是不錯的，因為收縮包裝巴人完全包裹正面和背面所以不可能在列印過程中旋轉巴人，因此所有的磨損發生在那裡的高點線圈記者對紙和塊的收縮包裝。

Whenlubricated with camellia oil, the PVC covering glides over thepaper with about the same 'feel' as takenokawa, though because it'scompletely non-absorbent and glossy smooth, it seems to run dry oflubricant faster than takenokawa and then frictionincreases…當與山茶花油，聚氯乙烯覆蓋滑過具有大致相同的'感覺'作為takenokawa紙，潤滑，但因為它是完全非吸收性和光澤光滑，似乎跑幹膜潤滑劑比takenokawa更快，然後摩擦增大...

I thinkI'll eventually be able to find a shrink tubing with more idealcharacteristics — in the meantime, this stuff seems to work betterthan I'd expected.我想我會最終能找到一個熱縮套管具有較為理想的特性 -在此期間，這東西似乎更好地工作比我的預期。